From: alsontra@hotmail.com
Date: Mon Mar 08 2004 - 23:27:55 GMT-3
Group,
I found any email in the archives that seemed to answer alot of my question
regarding DLSW and DDR, with the exception of few small things. The base
config looks like standard DDR and is rather straight forward. The example
below watches for default DLSW tcp encapsulation and all DLSW priority
levels. My question is how in the world do you set priority?
Dialer-list 1 protocol list 100
Access-list 100 permit tcp any any eq 2065
Access-list 100 permit tcp any any eq 2067
Access-list 100 permit tcp any any eq 1981
Access-list 100 permit tcp any any eq 1982
Access-list 100 permit tcp any any eq 1983
Access-list 100 deny ip any any
Perhaps under the remote-peer config or priority-list? I can't seem to find
an example on the CCO.
(dlsw,netbios and sna are the bain of my existence.)
Thanks
Alsontra
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:16 GMT-3