From: Wes Smith (wesmith@rogers.com)
Date: Mon Mar 08 2004 - 23:07:16 GMT-3
Alsontra .. I think you're looking for the 'dlsw remote-peer tcp blah
priority' command
alsontra@hotmail.com wrote:
>Group,
>I found any email in the archives that seemed to answer alot of my question
>regarding DLSW and DDR, with the exception of few small things. The base
>config looks like standard DDR and is rather straight forward. The example
>below watches for default DLSW tcp encapsulation and all DLSW priority
>levels. My question is how in the world do you set priority?
>
>
>Dialer-list 1 protocol list 100
>Access-list 100 permit tcp any any eq 2065
>Access-list 100 permit tcp any any eq 2067
>Access-list 100 permit tcp any any eq 1981
>Access-list 100 permit tcp any any eq 1982
>Access-list 100 permit tcp any any eq 1983
>Access-list 100 deny ip any any
>
>
>Perhaps under the remote-peer config or priority-list? I can't seem to find
>an example on the CCO.
>
>(dlsw,netbios and sna are the bain of my existence.)
>
>Thanks
>Alsontra
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:16 GMT-3