From: Larry Letterman (lletterm@cisco.com)
Date: Sat Feb 21 2004 - 16:41:24 GMT-3
I would vote for shutting down the ports,,,but putting them into a
non-routed vlan works just as well....
################
Larry Letterman
INS-NW-West
Cisco Systems Inc.
################
----- Original Message -----
From: "Casey, Paul (6822)" <Paul.Casey@o2.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, February 21, 2004 9:49 AM
Subject: Removing ports from default vlan
> Hello,
>
> What is the best way to remove all ports not in use on a 3550 switch
> from the default vlan.
>
> I could shutdown the ports not in use, thus removing then from the
> default vlan. or I could you no switch-port or put them in another vlan.
>
> Which is the best solution.,.??
>
> Kind regards.
>
>
>
> ****************************************************************************************
> Please note as of 31st March 2004 we will not be accepting any email to
> Digifone.com addresses. From this date please send all emails to O2.com.
> This E-mail is from O2. The E-mail and any files
> transmitted with it are confidential and may also be privileged and intended
> solely for the use of the individual or entity to whom they are addressed.
> Any unauthorised direct or indirect dissemination, distribution or copying
> of this message and any attachments is strictly prohibited. If you have
> received the E-mail in error please notify postmaster@O2.com or
> telephone ++ 353 1 6095000.
>
> *****************************************************************************************
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:54 GMT-3