From: Fowlie, Colin (Colin.Fowlie@aliant.ca)
Date: Mon Feb 23 2004 - 09:28:58 GMT-3
I would put them in another vlan... something not in use elsewhere in the topology.
First by doing "show vlan id 1" and then creating an interface range to match the ports installed into vlan 1.
Interface range f0/1 - 24
Switch mode access
Switch access vlan 999
HTH
-Colin
-----Original Message-----
From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
Sent: Saturday, February 21, 2004 1:50 PM
To: ccielab@groupstudy.com
Subject: Removing ports from default vlan
Hello,
What is the best way to remove all ports not in use on a 3550 switch
from the default vlan.
I could shutdown the ports not in use, thus removing then from the
default vlan. or I could you no switch-port or put them in another vlan.
Which is the best solution.,.??
Kind regards.
****************************************************************************************
Please note as of 31st March 2004 we will not be accepting any email to
Digifone.com addresses. From this date please send all emails to O2.com.
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
*****************************************************************************************
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:55 GMT-3