From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Feb 20 2004 - 14:48:59 GMT-3
<Quote>
I would like to know is the dialer watch cannot be controlled by time-based
ACL???
</Quote>
Dialer watch does not rely on interesting traffic. This means that your
dialer-list is irrelevant in regards to dialer watch. Dialer watch uses the
routing table to determine when to place a call or when to allow a call to
drop.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Raymond
Sent: Friday, February 20, 2004 9:23 AM
To: ccielab@groupstudy.com
Subject: time-based ACL with dialer-watch and backup interface
Hi All,
I would like to use time-based ACL with dialer-watch and also that with
backup
interface using BRI interface
1. I use time-based ACL with backup interface, when the primary link is
down,
the backup ISDN is still up once even after the time range. And it will not
dial out again after idle timeout. Is it normal?
2. I use time-based ACL with dialer watch, when the router lose the watched
route, it will dial out even after the time range. I have tried several
time,
the backup ISDN line still dial out after time range when losing watched
route.
I would like to know is the dialer watch cannot be controlled by time-based
ACL???
Thanks and Regards,
Ray
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:51 GMT-3