From: Raymond (maksir919@yahoo.com)
Date: Sat Feb 21 2004 - 07:18:41 GMT-3
Hi All,
Yes.
May be I let you all misunderstand. Let say, undoubtedly there is
"dialer-group" and "dialer watch-group" in the BRI interface.
I use time-based ACL in dialer-list.
I suppose even though the router lose the watched route. It will not dial out
as it is out of time range/restricted by dialer-list. But it seems the
behaviour is not match what I want.
Moreover, for backup interface, it seems the router must dial once when primary
link is failed.
Thanks
Ray
--- Brian Dennis <bdennis@internetworkexpert.com> *:6l%s$:.e!G> <Quote>
> I would like to know is the dialer watch cannot be controlled by time-based
> ACL???
> </Quote>
>
> Dialer watch does not rely on interesting traffic. This means that your
> dialer-list is irrelevant in regards to dialer watch. Dialer watch uses the
> routing table to determine when to place a call or when to allow a call to
> drop.
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Raymond
> Sent: Friday, February 20, 2004 9:23 AM
> To: ccielab@groupstudy.com
> Subject: time-based ACL with dialer-watch and backup interface
>
> Hi All,
>
> I would like to use time-based ACL with dialer-watch and also that with
> backup
> interface using BRI interface
> 1. I use time-based ACL with backup interface, when the primary link is
> down,
> the backup ISDN is still up once even after the time range. And it will not
> dial out again after idle timeout. Is it normal?
> 2. I use time-based ACL with dialer watch, when the router lose the watched
> route, it will dial out even after the time range. I have tried several
> time,
> the backup ISDN line still dial out after time range when losing watched
> route.
> I would like to know is the dialer watch cannot be controlled by time-based
> ACL???
>
> Thanks and Regards,
> Ray
>
> _________________________________________________________
> %21~'^!B6<:q!B$p,P,P...
> .v:)9aAn 1!$_3sC4
> http://us.rd.yahoo.com/evt=22281/*http://ringtone.yahoo.com.hk/
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:54 GMT-3