From: Kenneth Wygand (KWygand@customonline.com)
Date: Fri Feb 20 2004 - 14:28:37 GMT-3
Raymond,
Please post your configurations. Thanks.
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"Success is to be measured not so much by the position one has reached
in life as by the obstacles which he has overcome while trying to
succeed."
-Booker Taliaferro Washington
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Raymond
Sent: Friday, February 20, 2004 12:23 PM
To: ccielab@groupstudy.com
Subject: time-based ACL with dialer-watch and backup interface
Hi All,
I would like to use time-based ACL with dialer-watch and also that with
backup
interface using BRI interface
1. I use time-based ACL with backup interface, when the primary link is
down,
the backup ISDN is still up once even after the time range. And it will
not
dial out again after idle timeout. Is it normal?
2. I use time-based ACL with dialer watch, when the router lose the
watched
route, it will dial out even after the time range. I have tried several
time,
the backup ISDN line still dial out after time range when losing watched
route.
I would like to know is the dialer watch cannot be controlled by
time-based
ACL???
Thanks and Regards,
Ray
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:51 GMT-3