From: Ashok Verma \(ashoverm\) (ashoverm@cisco.com)
Date: Mon Feb 02 2004 - 07:00:41 GMT-3
Hi All ,
I have a very simple setup of Muticast,
R1
/ \
/ \
R2 R3
FR cloud is used between these routers and R1 is Hub, other router are
spoke.
If I enable multicast in on all three router and join a multicast
group(224.8.8.2)on R2, I am able to ping that group from R1 but not from
R3, I had enabled the Ip Pim dense mode on all the interfaces as
required.
So question is Do I need to do some more configuraiton on R1 so that R3
should able to ping the multicast group.
Thanks in advance.
Ashok Kumar Verma
CCIP,CCDP,CCNP
Network Consulting Engineer
Customer Advocacy Advanced Service Dep.
Service Provider AS Div.2
Cisco Systems, K.K.Japan.
Tel: +81-3-5324-4583
e-mail: ashoverm@cisco.com
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:45 GMT-3