From: Yasser Aly (blackyeyes00@hotmail.com)
Date: Fri Jan 23 2004 - 20:49:57 GMT-3
Dear All,
In the scenario I am working on, the task askes to bring both B channels
once the main link fails
I am having troubles in bringing the 2nd link up - sometimes it takes long
time to come up, sometimes it doesn't come up at all -. I have applied "
dialer load-threshold 1 either & ppp multilink " under the bri.
Would you kindly provide your thoughts for the following questions and
whether any would solve the problem:
1) Will it make a difference if I used under the BRI " dialer string
<remote_number> rather than using
dialer map ip <remote_ip> broadcast <remote_number> ?
2) The ISDN switch type is basic-ni. Do I need to define both SPID numbers ?
I heard before that it is generally speaking not needed at all to define the
2nd SPID number ?
Is this true, and if so then when to define the 2nd SPID number ?
3) Will it make a difference using dialer profiles than using Legacy DDR ?
Regards,
Yasser
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:49 GMT-3