From: Weidong Xiao (Weidong.Xiao@vi.net)
Date: Wed Jan 14 2004 - 08:23:21 GMT-3
Hi,
If I config layer 2 channel-groups between 2 switches, using different channel group numbers between them (sw1 use 10 and sw2 use 11, like below), will the channel work?
The question can be express as: is the channel group number only significant on the switch or between switches?
Thanks in advance,
Weidong
--------------------------------------
SW1:
interface GigabitEthernet0/1
switchport
switchport trunk encapsulation isl
switchport mode trunk
channel-group 11 mode on
!
interface GigabitEthernet0/2
switchport
switchport trunk encapsulation isl
switchport mode trunk
channel-group 11 mode on
---------------------------------------
SW2:
interface GigabitEthernet0/1
switchport
switchport trunk encapsulation isl
switchport mode trunk
channel-group 10 mode on
!
interface GigabitEthernet0/2
switchport
switchport trunk encapsulation isl
switchport mode trunk
channel-group 10 mode on
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:44 GMT-3