From: istong@stong.org
Date: Tue Jan 06 2004 - 14:59:05 GMT-3
Hi Reza,
Your lines need to have the command "no exec" added to solve
your issue. You could also consider adding "transport input
telnet" and "transport output none"
Thanks,
Ian
www.ccie4u.com
High End Rack Rentals and Lab Scenarios
>
> Hello Group
> I have a random issue with my terminal server. I have a
> 2511 that I use with an Octal cable to connect to my
> routers. Frequently I will see a line go hot without me
> having initiated a session (I see an asterisk by the line
> in 'show lines'). If I clear the line using 'clear line x'
> and then open a session to that device I will get about a
> hundred lines of trash thrown to the end device as input.
> Once the trash scrolls by and errors out, I have regular
> prompt access to the router with no further issues. There
> are also a lots of overrun and noise on these lines. This
> is not an all the time thing, but it is fairly frequent.
> Here's my setup on the terminal server: ip host r1 2001
> 1.1.1.1 ip host r2 2002 1.1.1.1
> ip host r3 2003 1.1.1.1
> ip host r4 2004 1.1.1.1
> ip host r5 2005 1.1.1.1
> ip host r6 2006 1.1.1.1
> interface Loopback0
> ip address 1.1.1.1 255.0.0.0
> line 1 16
> transport input all
> exec-timeout 0 0
> flowcontrol hardware (just added this recently )
> And here's the config for one of my end routers:
> line con 0
> flowcontrol hardware (just added this recently )
> transport input none
> Thanks
> Reza
>
> __________________________________________________________
> _____________ Please help support GroupStudy by purchasing
> your study materials from: http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
______________________________________________
Check Your Email From Any Where in the World!
Tell Your Friends about MyEmail.com!
______________________________________________
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:37 GMT-3