From: Sharifi, Reza (Reza.Sharifi@GD-NS.Com)
Date: Tue Jan 06 2004 - 14:23:15 GMT-3
Hello Group
I have a random issue with my terminal server. I have a 2511 that I use with
an Octal cable to connect to my routers. Frequently I will see a line go hot
without me having initiated a session (I see an asterisk by the line in
'show lines'). If I clear the line using 'clear line x' and then open a
session to that device I will get about a hundred lines of trash thrown to
the end device as input. Once the trash scrolls by and errors out, I have
regular prompt access to the router with no further issues. There are also a
lots of overrun and noise on these lines. This is not an all the time
thing, but it is fairly frequent. Here's my setup on the terminal server:
ip host r1 2001 1.1.1.1
ip host r2 2002 1.1.1.1
ip host r3 2003 1.1.1.1
ip host r4 2004 1.1.1.1
ip host r5 2005 1.1.1.1
ip host r6 2006 1.1.1.1
interface Loopback0
ip address 1.1.1.1 255.0.0.0
line 1 16
transport input all
exec-timeout 0 0
flowcontrol hardware (just added this recently )
And here's the config for one of my end routers:
line con 0
flowcontrol hardware (just added this recently )
transport input none
Thanks
Reza
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:37 GMT-3