Re: CONFIGURING A ROUTER AS A PSTN SIMULATOR -- NEED HELP !!

From: Kurt Bergsbaken (kbergsbaken@yahoo.com)
Date: Tue Dec 30 2003 - 19:14:13 GMT-3

• Next message: Kaiser Anwar: "Re: PVC discovery"
• Previous message: Scott Morris: "RE: PVC discovery"
• Maybe in reply to: Barman, Partha: "CONFIGURING A ROUTER AS A PSTN SIMULATOR -- NEED HELP !!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Saw this config on an AS5350, but hopefully a PRI is a
PRI. Have to get to the signalling channel - 23 on a
T-1 PRI.

M02TFTVG(config)#int serial 1/0:23
M02TFTVG(config-if)#isdn protocol-emulate ?
  network ISDN protocol emulation network side
  user ISDN protocol emulation user side (default)

M02TFTVG(config-if)#isdn protocol-emulate network

Will be some caveats for CAS, but this should be all
it takes for a PRI in a lab environment, assuming that
you are not looking for any SS7 functionality.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca716.html

--- "Barman, Partha" <PBarman@necbns.com> wrote:
> Hi Guys,
>
> Does anyone have a config of how to convert a router
> as a PSTN PRI and CAS simulator, if possible? In my
> lab, I have two sites and need to connect them via
> PSTN. But I have no PSTN simulator. So, I need to
> know if I can make the router as a PSTN simulator,
> to simulate a PRI, CAS, FXO switch.
>
> Please let me know .
>
> Thanks,
> Partha
>
>

• Next message: Kaiser Anwar: "Re: PVC discovery"
• Previous message: Scott Morris: "RE: PVC discovery"
• Maybe in reply to: Barman, Partha: "CONFIGURING A ROUTER AS A PSTN SIMULATOR -- NEED HELP !!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:46 GMT-3