From: Kaiser Anwar (kaiseranwar@sbcglobal.net)
Date: Tue Dec 30 2003 - 19:17:17 GMT-3
No, Its just back to back. I was just asking that for myself so I know that
the Doc cd has the correct configuration. its not missing any commands.
Thanks again
Kaiser Anwar
----- Original Message -----
From: "Scott Morris" <swm@emanon.com>
To: "'Kaiser Anwar'" <kaiseranwar@sbcglobal.net>
Sent: Tuesday, December 30, 2003 4:11 PM
Subject: RE: PVC discovery
> So you ARE using an ATM switch in the middle? Your original e-mail says
> back-to-back, so I assumed you had two routers with a cable between them
and
> that was it.
>
> If you have an ATM switch, then you create the 0/16 ilmi pvc, and you use
> the atm ilmi-pvc-discovery, then take a look at 'show atm pvc' and you
will
> see some marked as PVC-D which is the discovered PVCs.
>
> HTH,
>
> Scott
>
> -----Original Message-----
> From: Kaiser Anwar [mailto:kaiseranwar@sbcglobal.net]
> Sent: Tuesday, December 30, 2003 5:05 PM
> To: Scott Morris
> Subject: Re: PVC discovery
>
> Hi Scott,
> So Pvc is already established in the switch. putting the ip
> address and atm ilmi-pvc-discovery command should work.
> .
>
>
> Thanks
> Kaiser
>
>
> ----- Original Message -----
> From: "Scott Morris" <swm@emanon.com>
> To: "'Kaiser Anwar'" <kaiseranwar@sbcglobal.net>; <ccielab@groupstudy.com>
> Sent: Tuesday, December 30, 2003 3:51 PM
> Subject: RE: PVC discovery
>
>
> > That's because you need to use ILMI in order to do discovery. ILMI is a
> set
> > of communications with the ATM switch. So if you are doing back to back
> > ATM, then you have no switch, no ILMI, and therefore no discovery.
> >
> > HTH,
> >
> >
> > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP,
> > JNCIS, et al.
> > IPExpert CCIE Program Manager
> > IPExpert Sr. Technical Instructor
> > swm@emanon.com/smorris@ipexpert.net
> > http://www.ipexpert.net
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Kaiser Anwar
> > Sent: Tuesday, December 30, 2003 4:45 PM
> > To: ccielab@groupstudy.com
> > Subject: PVC discovery
> >
> > HI Group,
> > I was testing Pvc discovery with back to back on cisco
> routers.
> > I am doing exactly like the Doc CD. But its not working.
> > Thanks
> >
> >
> >
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan
> > _c/wcfatm.htm#1001188
> >
> > Sincerely,
> > Kaiser Anwar
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:46 GMT-3