From: Scott Morris (swm@emanon.com)
Date: Tue Dec 30 2003 - 18:51:43 GMT-3
That's because you need to use ILMI in order to do discovery. ILMI is a set
of communications with the ATM switch. So if you are doing back to back
ATM, then you have no switch, no ILMI, and therefore no discovery.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kaiser Anwar
Sent: Tuesday, December 30, 2003 4:45 PM
To: ccielab@groupstudy.com
Subject: PVC discovery
HI Group,
I was testing Pvc discovery with back to back on cisco routers.
I am doing exactly like the Doc CD. But its not working.
Thanks
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan
_c/wcfatm.htm#1001188
Sincerely,
Kaiser Anwar
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:46 GMT-3