From: Kelly, Russell G (Russell_Kelly@eu1.bp.com)
Date: Sun Dec 28 2003 - 18:53:02 GMT-3
Hello All,
I am currently setting up a 2511 for console access to my lab and I have
a question re. accessing and breaking out of console sessions. I have
ssh access configured for the TS and I am using putty to access the TS
with local aaa username/password configured
The issues are:
I am asked to supply the username/password when accessing the console
lines each time (after I access the TS of course) and I am not too sure
why. The incoming banner is displayed once I supply this
username/password....how do I get the TS not to ask for this
username/password each time I access one of the lines?
Also, I have an autocommand configured for one of the local username
passwords, but this doesn't seem to work?? Any ideas why, as from the
config it should??
Lastly when I am in a console session I want to break back out without
using ctrl-shift-6-x....how can I either suspend the session or break
out with another command. I have tried various configs under the line 1
16 configs (escape-character and disconnect-character but nothing seems
to work.
I am using the following IOS;c2500-is56i-l.121-3.T.bin and the relevant
sections of the config is below.
line 1 16
session-timeout 2
no motd-banner
exec-timeout 15 0
refuse-message ^CC
Sorry Line is in use, Please try later
^C
modem DTR-active
no exec
transport input all
escape-character BREAK
stopbits 1
flowcontrol hardware
line aux 0
menu LAB clear-screen
menu LAB status-line
menu LAB default me
menu LAB line-mode
banner incoming ^CC
#####################################################################
Please note, you are now connected to the RGK-Tech LAB
#####################################################################
Port 2001 = 3640
Port 2002 = 2610-A - FR HUB
Port 2003 = 2610-B
Port 2004 = 2621-A
Port 2005 = 2621-B
Port 2006 = 1900
Port 2008 = 1600-A
Port 2009 = 1600-B
Port 2010 = 1600-C
Port 2011 = TESTR3
Port 2012 = Cisco 2620 (ex-JackBates)
Port 2013 = Catalyst 3524XL (ex-JackBates)
Port 2014 = Cisco 2621 (euabzinfr02)
Port 2015 = TESTR4
Port 2016 = ISDNROUTER
#####################################################################
Hit return to access your selected device
^C
username labaccess privilege 15 password 0 cisco
username labaccess autocommand menu LAB
Any help greatly appreciated.
Thanks
Russ
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:46 GMT-3