From: Mike Dickson (Mike@dicksonnetworks.com)
Date: Sat Dec 27 2003 - 14:08:32 GMT-3
Are you sure about your IP and netmask assignments? The 2 ends of the
PVC aren't on the same subnet.
Mike Dickson
CCIE #12281, MCSE+Internet, MCDBA
Dickson Network Designs
(512) 422-3192 voice (512) 394-0320 fax
www.dicksonnetworks.com
-----Original Message-----
From: David Deng [mailto:glend_99@yahoo.com]
Sent: Friday, December 26, 2003 11:58 PM
To: ccielab@groupstudy.com
Subject: ATM PVC simple question
Hi Group,
Happy Holidays.
Just have a qick question on the ATM PVC with loopback
interface problem.
When Simple config as such will not work as long as the router Loopback
address is up,
r9-7200#sh run int a2/0
interface ATM2/0
ip address 136.10.69.9 255.255.255.248
no atm ilmi-keepalive
pvc 1/100
protocol ip 136.10.69.6 broadcast
Here is the output of the debug on icmp while pinging from the neighbor.
The echo-reply is returned to the loopback address of the neighbor, any
suggestion on getting the ping to work w/o shutdown the loopback ?
*Dec 26 20:33:50: ICMP: echo reply sent, src 136.10.69.9, dst 136.10.6.6
*Dec 26 20:33:52: ICMP: echo reply sent, src 136.10.69.9, dst 136.10.6.6
*Dec 26 20:33:54: ICMP: echo reply sent, src 136.10.69.9, dst 136.10.6.6
Thanks,
David
__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:45 GMT-3