From: kasturi cisco (kasturi_cisco@hotmail.com)
Date: Thu Dec 18 2003 - 21:23:35 GMT-3
Group,
Please help...I have a case which looks simple and dont know why it is
not working.Tried researching ..in vain. i know by default the NSSA
routes get translated to type-5 and redistributed to other OSPF areas.
Has this changed..using ver 12.2(10) on routers.
------EIGRP/RIP-------R12 ------nssa----- R8------area 0------- R4
area 700
R8 is the Hub of Hub and spoke. R8 sees the NSSA routes as N2 but does
not seem to distribute in into Area 0. Here are the relevant configs.
R12:
router ospf 100
redistribute eigrp 100 subnets route-map e2o
network 172.16.15.0 0.0.0.255 area 700
area 700 authentication
area 700 nssa
R8:
router ospf 100
router-id 172.16.5.5
log-adjacency-changes
area 0 authentication message-digest
area 700 authentication
area 700 nssa no-summary
area 700 range 172.16.15.0 255.255.255.0
network 172.16.15.0 0.0.0.255 area 700
network 172.16.45.0 0.0.0.255 area 0
neighbor 172.16.45.7
neighbor 172.16.45.4
r8#i ospf | inc N2
O N2 172.16.55.0/24 [110/20] via 172.16.15.1, 01:54:51, Serial1/0.1
O N2 172.16.40.0/24 [110/20] via 172.16.15.1, 01:54:51, Serial1/0.1
O N2 172.16.30.0/24 [110/20] via 172.16.15.1, 01:54:51, Serial1/0.1
O N2 172.16.16.0/27 [110/20] via 172.16.15.1, 01:54:51, Serial1/0.1
O N2 172.16.10.0/24 [110/20] via 172.16.15.1, 01:54:51, Serial1/0.1
O N2 172.16.1.0/24 [110/20] via 172.16.15.1, 01:54:51, Serial1/0.1
r8#
But R4 does not see it
Thanks for your help.
Good Luck,
Kasturi.
------------------------------------------------------------------------
Get dial-up Internet access now with our best offer: 6 months
@$9.95/month!
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:43 GMT-3