From: John Tafasi (johntafasi@yahoo.com)
Date: Thu Dec 04 2003 - 21:07:40 GMT-3
On my 3550 catalyst switch I can only configure the IP address of the VMPS
server. Look below:
Cat3550(config)#vmps ?
reconfirm Set VMPS reconfirm interval
retry Set VMPS retry count
server Configure server IP address
Cat3550(config)#vmps
John
----- Original Message -----
From: <Vazman@aol.com>
To: ""John Tafasi"" <johntafasi@yahoo.com>; <ccielab@groupstudy.com>
Sent: Thursday, December 04, 2003 3:47 PM
Subject: Re: VMPS file name
> See below for a sample config of the switch that is the VMPS server
switch. On a VMPS client switch, you would just configure the IP address of
the VMPS server switch. 10.100.20.69 is the TFTP server.
>
>
> set interface sc0 100 10.100.20.20/255.255.255.0 10.100.20.255
> !
> #vmps
> set vmps server 10.100.20.20 primary
> set vmps downloadserver 10.100.20.69 vmps-config-database.1
> set vmps state enable
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:36 GMT-3