From: asadovnikov (asadovnikov@comcast.net)
Date: Thu Dec 04 2003 - 20:57:35 GMT-3
2924Xl has a concept of management VLAN. Only one of L3 interfaces
described by vlan N can be in active state and the rest are in shutdown.
Unlike newer switches and/or IOS routers it is not possible to just do "no
shut" on an interface for it to become active. Instead what you need to do
is to create new vlan interface you want to be your management interface (by
default it is vlan 1) and use "management" command on this new interface.
This will "no shut" your new interface and "shut" vlan 1.
Here is the link:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc6/cli/cli
cmds.htm#xtocid53
Best regards,
Alexei
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
EbonyGuru@aol.com
Sent: Tuesday, December 02, 2003 8:30 AM
To: ccielab@groupstudy.com
Subject: CAT 2900 Issue
Dear All,
I am currently having problems bringing a vlan interface out of shutdown on
the above device.
Is there something ovbious I am missing here?
Interface Vlan3 is shutdown and determined to remain so. Please advice.
EG.
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:36 GMT-3