From: Ken.Farrington@barclayscapital.com
Date: Tue Dec 02 2003 - 13:13:36 GMT-3
Hi William,
I tried this using an analogue phone rather than using the csim start xxxx
and it still uses the first dial-peer it comes across that matches the
pattern.
Please can anyone explain if in fact the VOIP config with the pref command
is actually valid or not on the router R5.
Many thx indeed,
Ken
-----Original Message-----
From: William Chen [mailto:kwchen@netvigator.com]
Sent: 01 December 2003 23:59
To: Ken.Farrington@barclayscapital.com; ccielab@groupstudy.com
Subject: Re: Voice Hunt Groups
Hi Ken,
I also found this problem. It seems the first dail-peer in the
configuration is always picked. Do you use the "csim start" command? I
wonder if the "csim start" really simulate all of a real phone call. (at
leaset there is not a calling number if you use "csim start"). Maybe someone
here tried a real phone have a different result.
- William Chen
----- Original Message -----
From: <Ken.Farrington@barclayscapital.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, December 02, 2003 2:21 AM
Subject: Voice Hunt Groups
> Hi Guys,
>
> I beleive the basis of a hunt group setup is by using the preference
> command. I hope this is correct.
>
> I works fine using pots - from R5 I use the csim start
>
> R3
> !
> dial-peer voice 1111 pots
> preference 2
> destination-pattern 1111
> port 1/0/1
> !
> dial-peer voice 1112 pots
> preference 3
> destination-pattern 1111
> port 1/0/0
> !
>
> now on R5, if I want to use a preference on the VOIP dial-peer, only so
that
> one peer goes to one loopback address on R3 and the other voice peer goes
to
> the second loopback address on R3 (imaging they are on different routers
> completely but dont have the hardware for that) should this work? It
says
> in the docs, that this works for VoIP dial-peers ?
>
> ie,
>
> R5
> !
> dial-peer voice 1111 voip
> preference 9
> destination-pattern 1111
> session target ipv4:192.168.3.3 (loopback 300 on r3)
> !
> dial-peer voice 1112 voip
> preference 1
> destination-pattern 1111
> session target ipv4:192.169.3.3 (loopback 301 on r3)
> !
>
>
> Everytime I try this and debug for TCP/1720 it only goes from the
> 192.168.3.3 ???? Its a really old version of code, so if it is pss, i
will
> upgrade.
>
>
>
> ------------------------------------------------------------------------
> For more information about Barclays Capital, please
> visit our web site at http://www.barcap.com.
>
>
> Internet communications are not secure and therefore the Barclays
> Group does not accept legal responsibility for the contents of this
> message. Although the Barclays Group operates anti-virus programmes,
> it does not accept responsibility for any damage whatsoever that is
> caused by viruses being passed. Any views or opinions presented are
> solely those of the author and do not necessarily represent those of the
> Barclays Group. Replies to this email may be monitored by the Barclays
> Group for operational or business reasons.
>
> ------------------------------------------------------------------------
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:34 GMT-3