From: Ram Shummoogum (rshummoo@ca.ibm.com)
Date: Tue Dec 02 2003 - 13:19:23 GMT-3
Although a killer you can also use debug eigrp packet hello
"JamesGEF" <jamesgef@sympatico.ca>@groupstudy.com on 12/02/2003 10:00:16 AM
Please respond to "JamesGEF" <jamesgef@sympatico.ca>
Sent by: nobody@groupstudy.com
To: "Peng Zheng" <zpnist@yahoo.com>, <ccielab@groupstudy.com>
cc:
Subject: Re: How to check eigrp hello-interval for an interface
I don't believe there is a command that specifically states the value.
I do a "show ip eigrp nei" and look at the hold time see how long it takes
to reset. For example, if the hold time is always between 14 and 10
seconds
and always resetting to 14 when it reaches 10, well, I know the hello
interval is 5 seconds and hold interval is 15.
HTH,
James
----- Original Message -----
From: "Peng Zheng" <zpnist@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, December 02, 2003 3:46 AM
Subject: How to check eigrp hello-interval for an interface
> As subject.
>
> Thanks.
>
>
> __________________________________
> Do you Yahoo!?
> Free Pop-Up Blocker - Get it now
> http://companion.yahoo.com/
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:34 GMT-3