From: Bob Sinclair (bsin@cox.net)
Date: Sat Nov 22 2003 - 11:18:39 GMT-3
John,
I get alarm creation failure with a bad OID: Try the command below, which
works for me. I believe you will only have access to the univercd portion
of the CD. There are some examples there, but I doubt there is a full OID
reference. I find I will get the "alarm creation failure" if the OID is not
perfect.
rmon alarm 1 1.3.6.1.4.1.9.9.109.1.1.1.1.5.1 50 absolute rising-threshold 10
1 fall 4
HTH
-Bob Sinclair
CCIE #10427, CISSP, MCSE
703.282.9662
bsin@cox.net
----- Original Message -----
From: "John Tafasi" <johntafasi@yahoo.com>
To: "ccielab" <ccielab@groupstudy.com>
Sent: Saturday, November 22, 2003 1:49 AM
Subject: Alarm creation failure
> Hi Group,
>
> I receive this error message whenever I try to configur rmon alarm:
>
> Enter configuration commands, one per line. End with CNTL/Z.
> r5(config)#rmon alarm 1 1.3.6.1.4.1.9.9.109.1.2.3.1.1 6 absolute
> rising-threshold 4
> Alarm creation failure
> r5(config)#
>
> Could someone figure out what is wrong?
>
> John
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:15 GMT-3