RE: RSVP

From: asadovnikov (asadovnikov@comcast.net)
Date: Thu Nov 20 2003 - 01:04:20 GMT-3

• Next message: Donny MATEO: "Re: Good refrence to study redistribution& route control"
• Previous message: Bob Sinclair: "Re: Ping scripts for routers."
• Maybe in reply to: Silvio Nunes: "RSVP"
• Next in thread: Andriy Lysyuk: "RE: RSVP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Can not be done. RSVP is not configurable perVC. Only way to do it is to
move from multipoint interface with 2 VCs to two point-to-point interfaces,
and then configure RSVP on per-subinterface basis.

Best regards,
Alexei

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Silvio Nunes
Sent: Wednesday, November 19, 2003 7:53 PM
To: ccielab@groupstudy.com
Subject: RSVP

Guys,

I need a help about how to configure RSVP for differents DLCIs, for example:

Interface Seria0/0
ip add 10.10.10.1 255.255.255.0
no frame-relay inverse-arp
no arp frame-relay
frame-relay map ip 10.10.10.2 110 broadcast
frame-relay map ip 10.10.10.3 111 broadcast

I want to specify a different RSVP configuration for each DLCI, but I didnt
find an option into map-class
frame-relay..

Any suggestion ?
Regards,

• Next message: Donny MATEO: "Re: Good refrence to study redistribution& route control"
• Previous message: Bob Sinclair: "Re: Ping scripts for routers."
• Maybe in reply to: Silvio Nunes: "RSVP"
• Next in thread: Andriy Lysyuk: "RE: RSVP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:14 GMT-3