RE: RSVP

From: Andriy Lysyuk (lysyuk@ics.ua)
Date: Thu Nov 20 2003 - 06:17:43 GMT-3

• Next message: Cocimano, Francesco: "deafalt gateway"
• Previous message: jfaure@sztele.com: "TFTP application to dowload more than 32M another time"
• Maybe in reply to: Silvio Nunes: "RSVP"
• Next in thread: Silvio Nunes: "RE: RSVP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

  I think that for performing RSVP for different DLCI you need to
configure subinterfaces and assign separate IP subnets on them.
  Or you can use CBWFQ with PQ and apply it on frame-relay map-class.

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Silvio Nunes
Sent: Thursday, November 20, 2003 2:53 AM
To: ccielab@groupstudy.com
Subject: RSVP

Guys,

I need a help about how to configure RSVP for differents DLCIs, for
example:

Interface Seria0/0
ip add 10.10.10.1 255.255.255.0
no frame-relay inverse-arp
no arp frame-relay
frame-relay map ip 10.10.10.2 110 broadcast
frame-relay map ip 10.10.10.3 111 broadcast

I want to specify a different RSVP configuration for each DLCI, but I
didnt
find an option into map-class
frame-relay..

Any suggestion ?
Regards,

• Next message: Cocimano, Francesco: "deafalt gateway"
• Previous message: jfaure@sztele.com: "TFTP application to dowload more than 32M another time"
• Maybe in reply to: Silvio Nunes: "RSVP"
• Next in thread: Silvio Nunes: "RE: RSVP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:14 GMT-3