From: Alec (clapun@graduate.hku.hk)
Date: Fri Oct 17 2003 - 12:51:19 GMT-3
see if the below command helps. I guess the default preference is 0.
R6#show dial-peer voice summary
dial-peer hunt 0
AD PRE PASS
TAG TYPE MIN OPER PREFIX DEST-PATTERN FER THRU SESS-TARGET
PORT
10 pots up up 8888 0
1/0/0
20 voip up down 0 syst
----- Original Message -----
From: <Vazman@aol.com>
To: <ccielab@groupstudy.com>
Sent: Friday, October 17, 2003 2:01 PM
Subject: Voice preference default value
> Hello,
>
> Anyone knows what is the default preference for a dial peer? If you have
two dial peers with the same destination pattern and preference 1 and 2, the
dial peer with preference 1 will be used first.
>
> But if you have two dial peers with, one with no preference set and the
other with a preference of 1, which one will be used? I could not find it on
the DocCD or in the archives and dont have voice in my lab to test.
>
> Thanks,
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:04 GMT-3