From: Pierre-Alex (pierreg@planetkc.com)
Date: Fri Oct 03 2003 - 01:59:56 GMT-3
I also added to my router "ip local policy route-map addas in an attempt to
get this to work but no success even though matches are made
R5# sh route-map addas
route-map addas, permit, sequence 10
Match clauses:
ip address (access-lists): 1
Set clauses:
as-path prepend 1234
Policy routing matches: 213 packets, 25679 bytes
I think the reason why I cannot prepend to sourced routes is because the
route goes directly to the Local-RIB .... because the route is not received
from any peer.
If my thinking is right, then my original comment is true :
"Choose the route originated locally rather that the one that is not" is
not needed because
as-path of a route originated locally will always be shorter than any route.
Any comment welcome...
Thanks,
Pierre-Alex
----- Original Message -----
From: "Pierre-Alex" <pierreg@planetkc.com>
To: <ccielab@groupstudy.com>
Sent: Friday, October 03, 2003 5:42 AM
Subject: RE: bgp - prepending to locally source routes
> For your information this is what I did
>
> =============================
> router bgp 65030
> redistribute connected route-map addas
>
> route-map addas permit 10
> match ip address 1
> set as-path prepend 1234
>
> access-list 1
> permit any
>
> interface loopback 153
> ip addr 172.16.153.1 255.255.255.0
>
> =============================
>
> This is what I get
>
> *> 172.16.153.0/24 0.0.0.0 0 32768 ?
>
> =============================
>
> thanks,
>
> Pierre-Alex
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:56 GMT-3