From: Andriy Lysyuk (lysyuk@ics.ua)
Date: Fri Sep 26 2003 - 08:10:51 GMT-3
Hello.
I don't think that 'dialer watch-list <group-number>delay disconnect
<disconnect-time>'
do the exact same thing as the 'watch-disable'.
The Dialer Watch Connect Delay feature introduces the ability to
configure a delay in bringing up a secondary link when a primary link
that is monitored by Dialer Watch goes down and is removed from the
routing table.
Watch-disable set a delay time to the move down backup interface.
So these delays are different. The first delay is between primary goes
down and secondary goes up and the second delay is between primary goes
up and secondary goes down.
Andriy Lysyuk.
CCIE# 10933
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
William Lijewski
Sent: Friday, September 26, 2003 12:06 AM
To: zpnist@yahoo.com; ccielab@groupstudy.com
Subject: Re: Any difference between dialer watch-disable and dialer
watch-list group-number delay disconnect disconnect-time?
The 'dialer watch-list <group-number>delay disconnect <disconnect-time>'
appears to do the exact same thing as the 'watch-disable'. They both
wait
for X amount of seconds after the primary route comes back to disconnect
the
BRI. The 'dialer watch-list <group-number>delay disconnect
<disconnect-time>' is the newer of the two being introduced in 12.2(8)T.
I
would say that since this is a 12.2 test now, if this came up in the lab
I
would use the newer version.
Here are links to both of them:
DELAY DISCONNECT
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_
guide09186a00800e9753.html
WATCH-DISABLE
http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_command_
summary_chapter09186a00800ed412.html
Bill Lijewski
CCIE #8642
Network Learning Inc
5 Day R&S CCIE Bootcamp Instructor
>From: Peng Zheng <zpnist@yahoo.com>
>Reply-To: Peng Zheng <zpnist@yahoo.com>
>To: ccielab@groupstudy.com
>Subject: Any difference between dialer watch-disable and dialer
watch-list
>group-number delay disconnect disconnect-time?
>Date: Thu, 25 Sep 2003 13:51:15 -0700 (PDT)
>
>I think the only difference is dialer watch-list
>group-number delay disconnect disconnect-time is for a
>special watch-list.
>
>
>
>__________________________________
>Do you Yahoo!?
>The New Yahoo! Shopping - with improved product search
>http://shopping.yahoo.com
>
>***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:37 GMT-3