From: Boyan Krosnov (bkrosnov@lirex.bg)
Date: Thu Sep 25 2003 - 12:52:25 GMT-3
switchport trunk commands are only active when the port is in trunk
mode.
switchport access commands are only active when the port is in access
mode.
The config is valid. This is a trunk with all active vlans allowed.
"switchport access vlan 567" can be safely removed from the
configuration.
BR,
Boyan Krosnov, CCIE#8701
http://boyan.ludost.net/
just another techie speaking for himself
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of seonghui
> Sent: Thursday, September 25, 2003 6:41 PM
> To: ccielab@groupstudy.com
> Subject: switchport access and switchport trunk on the same port
>
>
> Hi Group,
>
> Just out of curiousity, what does the below config mean:
>
> interface FastEthernet0/17
> description *** R7 ***
> switchport access vlan 567
> switchport trunk encapsulation dot1q
> switchport mode trunk
> no ip address
>
> Does it mean that R7 connected to switch port fas0/17 is on
> vlan567 and at
> the same time, R7 is also a dot1q trunk? Or this config is
> not valid at all?
> and cannot be applied under any environment.
>
> regards - SH
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> ______________________________________________________________
> _________
> Please help support GroupStudy by purchasing your study
> materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:37 GMT-3