From: Seonghui (Seonghui@vads.com)
Date: Fri Sep 19 2003 - 05:32:18 GMT-3
Hi Group,
Sorry to ask this question without testing it. I am still waiting for my
ISDN simulator...
I was going thru a dialer watch-list scenario and suddenly this question
poped up in my head. If I have more than one network in my dialer watch-list
to be 'watched' and they are in the same watch-list group 1, will the ISDN
trigger based on:-
1) either route lost from the routing table?
2) Or both routes must dissappear from the routing table before the ISDN
initiate a call?
3) or will it based on only the first statement in the dialer watch-list?
second statement is ignored?
Below is the config:
interface BRI1/0
ip address 172.16.20.2 255.255.255.0
encapsulation ppp
shutdown
dialer map ip 172.16.200.0 name r5 broadcast 77128888
dialer map ip 172.16.100.0 name r5 broadcast 77128888
dialer map ip 172.16.20.5 name r5 broadcast 77128888
dialer watch-group 1
isdn switch-type basic-net3
ppp authentication chap
!
dialer watch-list 1 ip 172.16.200.0 255.255.255.128
dialer watch-list 1 ip 172.16.100.0 255.255.255.128
I tried searching the doc cd but the example is only for watching 1 route.
Thanks and regards - SH
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:31 GMT-3