From: EToker@secura.com.tr
Date: Fri Sep 19 2003 - 08:51:36 GMT-3
Hi,
It checks at least one valid route for the watched networks. It will not trigger if at least one of the routes is still available.
-----Original Message-----
From: Seonghui [mailto:Seonghui@vads.com]
Sent: 19 Eyl|l 2003 Cuma 11:32
To: ccielab@groupstudy.com
Subject: question on dialer watch-list
Hi Group,
Sorry to ask this question without testing it. I am still waiting for my ISDN simulator...
I was going thru a dialer watch-list scenario and suddenly this question poped up in my head. If I have more than one network in my dialer watch-list to be 'watched' and they are in the same watch-list group 1, will the ISDN trigger based on:-
1) either route lost from the routing table?
2) Or both routes must dissappear from the routing table before the ISDN initiate a call?
3) or will it based on only the first statement in the dialer watch-list? second statement is ignored?
Below is the config:
interface BRI1/0
ip address 172.16.20.2 255.255.255.0
encapsulation ppp
shutdown
dialer map ip 172.16.200.0 name r5 broadcast 77128888
dialer map ip 172.16.100.0 name r5 broadcast 77128888
dialer map ip 172.16.20.5 name r5 broadcast 77128888
dialer watch-group 1
isdn switch-type basic-net3
ppp authentication chap
!
dialer watch-list 1 ip 172.16.200.0 255.255.255.128
dialer watch-list 1 ip 172.16.100.0 255.255.255.128
I tried searching the doc cd but the example is only for watching 1 route.
Thanks and regards - SH
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com*** _______________________________________________________________________
Please help support GroupStudy by purchasing your study materials from: shop.groupstudy.com
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:31 GMT-3