From: Barney Gaumer (bagaumer@yahoo.com)
Date: Thu Sep 18 2003 - 13:35:01 GMT-3
priority 0 on an interface tells the router not to
participate in the DR election process on that
interface.
B
--- navaid@rogers.com wrote:
> According to Doc. CD you need neighbor only on Hub
> that is router with high priority value.
>
> Navaid
> >
> > From: "Kaiser Anwar" <kaiseranwar@sbcglobal.net>
> > Date: 2003/09/18 Thu PM 12:35:56 EDT
> > To: "christopher snow" <cbsnow31@yahoo.com>
> > CC: <ccielab@groupstudy.com>
> > Subject: Re: ospf neigbhor issue
> >
> > It is finally working, what I had was only one nei
> under the R3 which is a
> > hub and has default priority 1 and R1 had
> Interface
> > priority 0. After putting another nei command in
> r1. R 3 became the DR.
> > Thanks all
> >
> >
> > Kaiser A
> > ----- Original Message -----
> > From: "christopher snow" <cbsnow31@yahoo.com>
> > To: "Kaiser Anwar" <kaiseranwar@sbcglobal.net>
> > Cc: <ccielab@groupstudy.com>
> > Sent: Thursday, September 18, 2003 5:59 AM
> > Subject: Re: ospf neigbhor issue
> >
> >
> > > Do all of what Navaid mentioned...
> > >
> > > Also ensure that the subnet masks match as this
> can be
> > > a common error. Also make sure the neighbor
> statement
> > > is on the hub (non 0 priority router).
> > >
> > > HTH
> > >
> > > Chris Snow
> > >
> > >
> > >
> > > --- Kaiser Anwar <kaiseranwar@sbcglobal.net>
> wrote:
> > > > Hi,
> > > > I have a simple about ospf NBMA multipoint
> > > > interface. I have R1 connected
> > > > to R3 with Frame relay map statements.
> > > > I dont want to use ip ospf network
> staement. This
> > > > is how i am doing, I dont
> > > > know what i am missing.
> > > > All I have on router 1 is network statement
> and
> > > > on interface i have ip ospf
> > > > priority 0 so it does not become BDR.
> > > > R3 has nei statement for R1. This is what I
> get
> > > > when using the show
> > > > command. Thanks
> > > >
> > > >
> > > >
> > > > r3#o nei
> > > >
> > > > Neighbor ID Pri State Dead
> Time
> > > > Address Interface
> > > > N/A 0 ATTEMPT/DROTHER -
> > > > 130.10.10.1 Serial0/0.1
> > > >
> > > > ***Get your CCIE and a FREE vacation:
> > > > Shop.GroupStudy.com***
> > > >
> > >
>
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:30 GMT-3