RE: ospf neigbhor issue

From: Rob Laidlaw (laidlaw@consecro.com)
Date: Thu Sep 18 2003 - 01:43:18 GMT-3

• Next message: Lloyd J.Rochon III: "RE: PIX501 with PPPoe to PIX525"
• Previous message: David Prall: "RE: The 3700 router and switching module"
• Maybe in reply to: Kaiser Anwar: "ospf neigbhor issue"
• Next in thread: Larry Letterman: "RE: ospf neigbhor issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

put a neighbor statement on your other router too.

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Kaiser Anwar
Sent: Wednesday, September 17, 2003 11:43 PM
To: ccielab@groupstudy.com
Subject: ospf neigbhor issue

Hi,
   I have a simple about ospf NBMA multipoint interface. I have R1 connected
to R3 with Frame relay map statements.
   I dont want to use ip ospf network staement. This is how i am doing, I
dont
know what i am missing.
   All I have on router 1 is network statement and on interface i have ip
ospf
priority 0 so it does not become BDR.
   R3 has nei statement for R1. This is what I get when using the show
command. Thanks

r3#o nei

Neighbor ID Pri State Dead Time Address Interface
N/A 0 ATTEMPT/DROTHER - 130.10.10.1
Serial0/0.1

***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***

• Next message: Lloyd J.Rochon III: "RE: PIX501 with PPPoe to PIX525"
• Previous message: David Prall: "RE: The 3700 router and switching module"
• Maybe in reply to: Kaiser Anwar: "ospf neigbhor issue"
• Next in thread: Larry Letterman: "RE: ospf neigbhor issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:30 GMT-3