From: Larry Letterman (lletterm@cisco.com)
Date: Thu Sep 18 2003 - 04:18:11 GMT-3
Either statically configure a neighbor or change the network
Type to broadcast or point-multipoint...
Larry Letterman
Cisco Systems
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kaiser Anwar
Sent: Wednesday, September 17, 2003 9:43 PM
To: ccielab@groupstudy.com
Subject: ospf neigbhor issue
Hi,
I have a simple about ospf NBMA multipoint interface. I have R1
connected to R3 with Frame relay map statements.
I dont want to use ip ospf network staement. This is how i am doing,
I dont know what i am missing.
All I have on router 1 is network statement and on interface i have
ip ospf priority 0 so it does not become BDR.
R3 has nei statement for R1. This is what I get when using the show
command. Thanks
r3#o nei
Neighbor ID Pri State Dead Time Address
Interface
N/A 0 ATTEMPT/DROTHER - 130.10.10.1
Serial0/0.1
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:30 GMT-3