From: beda jain (bpjain@cisco.com)
Date: Mon Sep 15 2003 - 10:47:23 GMT-3
i think first one is the right answer
you are not allowed to change the number in port 2
Beda
At 03:40 PM 9/15/2003 +0200, m.m.jansen02@kpn.com wrote:
>All,
>1
>When i reread the q, expansion sounds good when there is another number
>attached to that port 2.
>ie 55555
>num-expansion 0 55555
>
>2
>You also could just assign 0 to the second port.... ;-) as
>destination-pattern
>port 1
>dial peer pots
>destination-pattern 11111
>
>port 2
>dial peer pots
>destination-pattern 0
>
>
>Martijn
>
>
>-----Oorspronkelijk bericht-----
>Van: beda jain [mailto:bpjain@cisco.com]
>Verzonden: maandag 15 september 2003 15:24
>Aan: John Tafasi; ccielab
>Onderwerp: Re: Voice challenge
>
>
>i think num-expansion 0 xxxxx (second port.)
>
>if you dial form second port you will get busy, but you dila from port 1 it
>will go to port 2.
>
>Thanks
>Beda
>At 02:50 AM 9/15/2003 -0600, John Tafasi wrote:
> >Hi Group,
> >
> >I have this scenario: Router A is a voice router with two FXS analoge voice
> >ports, each port is connected to an analoge telephone. I would like to
> >configure the router such that when the user connected to the first port
> >dial 0, the call will go to the other user at the second port. How would
>you
> >configure that?
> >
> >
> >John Tafasi
> >
> >***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> >_______________________________________________________________________
> >Please help support GroupStudy by purchasing your study materials from:
> >shop.groupstudy.com
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
>***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:28 GMT-3