From: Imran (Imrank@emirates.net.ae)
Date: Mon Sep 15 2003 - 17:48:17 GMT-3
Hi John,
It should be simply 2 Voice POTS configuration.
As you have phone in both the ports so no need for anything extra , just
configure dial-peer for POTS.
you can also try this by trying the command csim-start 0 to test the
connection.
Following is the configuration
voice-port 1/1/0
voice-port 1/1/1
dial-peer voice 1 pots
destination-pattern 0
port 1/1/0
dial-peer voice 2 pots
destination-pattern 1
port 1/1/1
Thanks
Imran
----- Original Message -----
From: "John Tafasi" <johntafasi@yahoo.com>
To: "ccielab" <ccielab@groupstudy.com>
Sent: Monday, September 15, 2003 12:50 PM
Subject: Voice challenge
> Hi Group,
>
> I have this scenario: Router A is a voice router with two FXS analoge
voice
> ports, each port is connected to an analoge telephone. I would like to
> configure the router such that when the user connected to the first port
> dial 0, the call will go to the other user at the second port. How would
you
> configure that?
>
>
> John Tafasi
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:28 GMT-3