From: Larry Roberts (larryr@netbeam.net)
Date: Thu Sep 11 2003 - 17:23:16 GMT-3
Eyad,
You need to assign ports to the VLANs and place hosts in the VLANs for them
to become up/up.
HTH,
Larry Roberts
CCIE #7886 (R&S / Security)
----- Original Message -----
From: "Eyad Bajes" <eyadbajes@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, September 11, 2003 1:12 PM
Subject: 6509 Question
> Hello Group,Quick simple question, I have a dual MSFC on a 6509 Chassis
> with of course dual Sups.trying to config intervlan routing.created 15
> vlan interfaces on the MSFCs after I've of course created the VLANs on
> the switch. the problem is that the vlans on the MSFC are all showing
> dn/dn except vlan 19 interface ( which happens to be the managment vlan
> on the switch ). I'm note sure if these vlans are supposed to be dn/dn,
> and/or what can be done to bring them up. On the side note, I've entered
> the command no shut for all interfaces. appreciate the help.Thanks,Eyad
>
> ------------------------------------------------------------------------
>
> Send and receive larger attachments with Hotmail Extra Storage.
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:26 GMT-3