From: miken (miken@sisna.com)
Date: Wed Sep 10 2003 - 13:57:22 GMT-3
Hello Yunming,
Whew....no there's a question. There are many, but I have to speculate that
the lab proctors have chosen a code that has minimal bugs related to the
technologies they will be testing us on. As always, I may be wrong in my
assumption.
Thanks,
Mike N
----- Original Message -----
From: "Yunming Song" <yunming_song@hotmail.com>
To: <miken@sisna.com>; <ccielab@groupstudy.com>
Sent: Wednesday, September 10, 2003 7:08 AM
Subject: Re: ISDN Spid status issue ?
> Hi Mike,
>
> Exactly, that is one bug existing in IOS 12.0(7)T, thank you!
> BTW, since new CCIE lab has moved to 12.2,
> do you known any other bugs existing in IOS 12.2 & 12.1?
>
> thanks,
> Yunming
>
>
> >From: "miken" <miken@sisna.com>
> >Reply-To: "miken" <miken@sisna.com>
> >To: "miken" <miken@sisna.com>, "Yunming Song"
<yunming_song@hotmail.com>,
> > <ccielab@groupstudy.com>
> >Subject: Re: ISDN Spid status issue ?
> >Date: Tue, 9 Sep 2003 14:48:36 -0600
> >
> >Correcton.....12.0(7)T. My apologies.
> >
> >Thanks,
> >Mike N
> >
> >
> >----- Original Message -----
> >From: "miken" <miken@sisna.com>
> >To: "Yunming Song" <yunming_song@hotmail.com>; <ccielab@groupstudy.com>
> >Sent: Tuesday, September 09, 2003 2:23 PM
> >Subject: Re: ISDN Spid status issue ?
> >
> >
> > > Looks like 12.1(7)T code to me. That code has a visual bug in it. If
> >SPID1
> > > is truely invalid, it would never try to send SPID2.
> > >
> > > Thanks,
> > > Mike N
> > >
> > > ----- Original Message -----
> > > From: "Yunming Song" <yunming_song@hotmail.com>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Tuesday, September 09, 2003 8:47 AM
> > > Subject: ISDN Spid status issue ?
> > >
> > >
> > > > Hi group,
> > > >
> > > > I follow ALL-IN-ONE Cisco CCIE LAB Study Guide (2nd edition) Lab#2:
> > > > ISDN basics and switch basics by using VConsole ISDN simulator
> > > > with inital basic-ni setting, Router 1720 and 2621 with the
following
> > > > result and setting. I always get the Spid status from 2621, which
says
> > > > spid1/spid2 NOT VALID, but 1720 side is always fine.
> > > > I exchange the isdn ports and setting for 1720 and 2621,
> > > > the result for 2621 remains the same, I can't explain this ??
> > > >
> > > > thanks,
> > > > Yunming Song
> > > >
> > >
> > >
>
>--------------------------------------------------------------------------
> > > ---------------------------
> > > >
> > > > 2621# sh isdn status
> > > > .....
> > > > Layer 2 Status:
> > > > TEI = 66, State = MULTIPLE_FRAME_ESTABLISHED
> > > > TEI = 67, State = MULTIPLE_FRAME_ESTABLISHED
> > > > Spid status:
> > > > TEI 66, ces = 1, state = 8 (established)
> > > > spid1 configured, no LDN, spid1 sent, spid1 not valid
> > > > TEI 67, ces = 2, state = 8 (established)
> > > > spid2 configured, no LDN, spid2 sent, spid2 not valid
> > > > ...........
> > > >
> > > > ---------------------------------------------------------
> > > > 1720# sh run
> > > > ....
> > > > isdn switch-type basic-ni1
> > > >
> > > > interface bri0/0
> > > > ip address 196.1.1.1 255.255.255.0
> > > > encapsulation ppp
> > > > isdn spid1 408111111101
> > > > isdn spid2 408111111102
> > > > dialer idel-timeout 90
> > > > dialer map ip 196.1.1.2 name 2621 broadcast 4082222222
> > > > dialer load-threshhold 1
> > > > dialer-group 1
> > > > no fair-queue
> > > > ppp authentication chap
> > > > ppp multilink
> > > > !
> > > > dialer-list 1 protocol ip permit
> > > > ---------------------------------------------------------
> > > > 2621#sh run
> > > > ..........
> > > > isdn switch-type basic-ni1
> > > >
> > > > interface bri0/0
> > > > ip address 196.1.1.2 255.255.255.0
> > > > encapsulation ppp
> > > > isdn spid1 408222222201
> > > > isdn spid2 408222222202
> > > > dialer idel-timeout 90
> > > > dialer map ip 196.1.1.1 name 1720
> > > > dialer-group 1
> > > > no fair-queue
> > > > ppp authentication chap
> > > > ppp multilink
> > > > !
> > > > dialer-list 1 protocol ip permit
> > > >
> > > > _________________________________________________________________
> > > > Express yourself with MSN Messenger 6.0 -- download now!
> > > > http://www.msnmessenger-download.com/tracking/reach_general
> > > >
> > > >
> > > >
> >_______________________________________________________________________
> > > > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > > >
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:25 GMT-3