From: Jonathan V Hays (jhays@jtan.com)
Date: Thu Aug 28 2003 - 20:18:35 GMT-3
By 'native' do you mean the Set/Clear syntax? If so, take a look at
this:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_1/confg
_gd/span.htm
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jim Phillipo
Sent: Thursday, August 28, 2003 6:16 PM
To: 'MADMAN'
Cc: ccielab@groupstudy.com
Subject: RE: 6500 SPAN Sessions
Do u know the syntax ?
-----Original Message-----
From: MADMAN [mailto:dmadlan@qwest.com]
Sent: Thursday, August 28, 2003 4:59 PM
To: Jim Phillipo
Cc: ccielab@groupstudy.com
Subject: Re: 6500 SPAN Sessions
Yes:
Native6506(config)#monitor session 1 source vlan 1 - 10 both ?
<cr>
Dave
Jim Phillipo wrote:
>Is it possible to have one port SPAN multiple VLANS using native CAT OS
?
>
>
>TIA
>
>Jim Phillipo, CCNP, CCDP
>Sr. Internetworking Engineer
>W: 401.456.1821 F: 401.456.0599 M: 508.982.8923
>90 Royal Little Drive, Providence, RI 02904
>www.guardent.com
>_____________________________________________________
>G U A R D E N T
>Security | Privacy | Data Protection
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Emotion should reflect reason not guide it"
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:09 GMT-3