From: Rob Laidlaw (laidlaw@consecro.com)
Date: Tue Aug 26 2003 - 00:46:33 GMT-3
if you are using a term server, then on each router or end device you need
to change the terminal escape character. under priviliged exec mode
(router#)terminal escape-character xxx (xxx can be the character, the ascii
equivalent, none, default and some others). It makes things more complex
because you now have 2 escape sequences, but since you'll be doing most of
the work on the routers and not the terminal server, you'll be using the new
sequence all the time and the default very little.
GL
Rob
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
wing_lam@jossynergy.com
Sent: Monday, August 25, 2003 9:40 PM
To: ccielab@groupstudy.com
Subject: Stop the traceroute in console connected by a terminal server
Hi group,
Can any body suggest me a method to stop the trace route in console, whihc
is connected to the terminal server? Ctrl+Shift+6 and X seems doesn't work
as it just escape from the Console.
Thx,
BBD (Big Blck Dog)
DISCLAIMER:- This email is confidential and intended only for the use of
the individual or entity named above and may contain information that is
privileged. If you are not the intended recipient, you are notified that
any dissemination, distribution or copying of this email is strictly
prohibited. If you have received this email in error, please notify us
immediately by return email or telephone and destroy the original message.
Thank you.
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:07 GMT-3