From: Danny.Andaluz@triaton-na.com
Date: Tue Aug 26 2003 - 13:19:17 GMT-3
I thought maybe I learned an easier way to break out of traces when connected to a console from a TermServer, but I tried the method below and it does not work. I have to hold down those 3 keys (Shift+Ctrl+6 6) until it stops, which takes about 2 seconds.
Danny
-----Original Message-----
From: Jonathan V Hays [mailto:jhays@jtan.com]
Sent: Tuesday, August 26, 2003 8:49 AM
To: 'Rob Laidlaw'; wing_lam@jossynergy.com
Cc: ccielab@groupstudy.com
Subject: RE: Stop the traceroute in console connected by a terminal server
Changing the terminal escape character is not necessary.
Just press the '6' key one extra time to break out of a trace or ping on the local router.
Shift+Ctrl+6 6
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Rob Laidlaw
Sent: Monday, August 25, 2003 11:47 PM
To: wing_lam@jossynergy.com
Cc: ccielab@groupstudy.com
Subject: RE: Stop the traceroute in console connected by a terminal server
if you are using a term server, then on each router or end device you need to change the terminal escape character. under priviliged exec mode (router#)terminal escape-character xxx (xxx can be the character, the ascii equivalent, none, default and some others). It makes things more complex because you now have 2 escape sequences, but since you'll be doing most of the work on the routers and not the terminal server, you'll be using the new sequence all the time and the default very little.
GL
Rob
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of wing_lam@jossynergy.com
Sent: Monday, August 25, 2003 9:40 PM
To: ccielab@groupstudy.com
Subject: Stop the traceroute in console connected by a terminal server
Hi group,
Can any body suggest me a method to stop the trace route in console, whihc is connected to the terminal server? Ctrl+Shift+6 and X seems doesn't work as it just escape from the Console.
Thx,
BBD (Big Blck Dog)
DISCLAIMER:- This email is confidential and intended only for the use of the individual or entity named above and may contain information that is privileged. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify us immediately by return email or telephone and destroy the original message. Thank you.
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:07 GMT-3