From: boby2kusa@hotmail.com
Date: Mon Aug 25 2003 - 14:00:18 GMT-3
Pretty please?!?
----- Original Message -----
From: <wwwjjang@chol.com>
To: <ccielab@groupstudy.com>
Sent: Monday, August 25, 2003 1:50 AM
Subject: Cat 3550's SVI-Question!!
> Hi..everyone..
>
> I have no cat3550 switch. so i don't test this configuration..
> So, The people who has a catalyst 3550 help me solve this problom..
>
> Thanks..
>
> --------
> Diagram
> --------
>
> (s0)-R1-(e0 1.1.1.1)-(Fa0/1)-Cat3550--(Fa0/2)-(e0 1.1.1.2)--R2-(s0)
>
> -Cat 3550's Fa0/1 & Fa0/2 is included in Vlan 100.
> -Cat 3550's IP is 1.1.1.3/24
> -R1's E0 & R2's E0 is in OSPF-Area 1
> -R1's & R2'S0 is in OSPF-Area0
>
> ---------
> Question
> ---------
>
> If One of the R1 & R2's Ethenet-interfaces goes down,
> Make sure Cat3550 has an alternate route..!!
>
> ------------
> My solution
> ------------
> -If i use a Default-gateway configuration , It's not an answer
> (Because it does not give an alternate route..)
> - i think i must use a L3-interface, So
> I put the "SVI 100-interfaces in the OSPF-Process" => is it right ??
>
> ip routing
> !
> interface vlan 100
> ip address 1.1.1.3 255.255.255.0
> !
> router ospf 1
> network 1.1.1.3 0.0.0.0 area 1
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:06 GMT-3