From: MMoniz (ccie2002@tampabay.rr.com)
Date: Sun Aug 17 2003 - 00:01:44 GMT-3
It is just an alias. alias configure ri router isis
ri 56.0009
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
kym blair
Sent: Saturday, August 16, 2003 8:46 PM
To: ccie2002@tampabay.rr.com; PBrown4@chartercom.com;
ccielab@groupstudy.com
Subject: RE: ISIS issue
What does your alias "ri 56.0009" do?
>From: "MMoniz" <ccie2002@tampabay.rr.com>
>Reply-To: "MMoniz" <ccie2002@tampabay.rr.com>
>To: "Brown, Patrick \(NSOC-OCF}" <PBrown4@chartercom.com>, "'MMoniz '"
><ccie2002@tampabay.rr.com>, <ccielab@groupstudy.com>
>Subject: RE: ISIS issue
>Date: Sat, 16 Aug 2003 18:16:29 -0400
>
>I would think too. But this happens even after clear config, power cycle.
>Then config again.
>
>I don't get it. It almost seems like once you config an ISIS net system ID
>the router has it for life.
>
>
>I have erased my configs several times, reload , power cycle and still the
>same.
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Brown, Patrick (NSOC-OCF}
>Sent: Saturday, August 16, 2003 5:24 PM
>To: 'MMoniz '; 'ccielab@groupstudy.com '
>Subject: RE: ISIS issue
>
>
>MMoniz,
>
>Do you have another NET configured on the router? If multiple NET's are
>configured on the router, you must have the same system ID. This is not a
>bug! Do a "no router clns" and a "no router isis".
>HTH
>
>Patrick B
>-----Original Message-----
>From: MMoniz
>To: ccielab@groupstudy.com
>Sent: 8/16/2003 3:14 PM
>Subject: ISIS issue
>
>Do you think this is a bug or what. After completely erasing my configs
>and
>power cycling my routers I start a new config.
>
>When configuring ISIS it will not let me use any system ID other than
>the
>one I had configured prior. Even when configuring a different area than
>was
>before. My worry is if I do this in the lab and typo the system ID I
>cannot
>change it.
>
>This happens on 12.1 and 12.2 code
>
>R6(config)#ri 56.0009
>R6(config-router)#net 56.0009.6666.0000.0000.66
>%CLNS: System ID (6666.0000.0000.00) must not change when defining
>additional area addresses
>R6(config-router)#net 56.0009.6666.0000.0000.00
>R6(config-router)#
>
>Any ideas?
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3