cat3550 cannot establish ospf nei with router/s

From: seonghui (seonghui@vads.com)
Date: Sat Aug 16 2003 - 14:00:25 GMT-3


Hi group,

I have been 'haunted' by this problem for the past two days. Here the
problem goes...

I have a router conneted to a Cat3550. router fa0/0 (ip address
10.10.10.1/24) is connected to port fas0/1 (vlan 10) on cat3550. I would
like cat3550 to establish ospf neighbour with the router and hence, I
created an Interface vlan 10 with ip address 10.10.10.2/24. However, the
router and the cat3550 just cannot form adjacency. Below is the debug
message:

07:28:30: OSPF: rcv. v:2 t:1 l:48 rid:10.10.10.1 aid:0.0.0.10 chk:7E15 aut:0
auk: from Vlan10
07:28:30: OSPF: Rcv hello from 10.10.10.1 area 11 from Vlan10 10.10.10.2
07:28:30: OSPF: End of hello processing
07:28:31: OSPF: rcv. v:2 t:2 l:32 rid:10.10.10.1 aid:0.0.0.10 chk:21B2 aut:0
auk: from Vlan10
07:28:31: OSPF: Rcv DBD from 10.10.10.1 on Vlan10 seq 0x2D3 opt 0x42 flag
0x7 len 32 mtu 1500 state EXSTART
07:28:31: OSPF: First DBD and we are not SLAVE
07:28:31: OSPF: Retransmitting DBD to 10.10.10.1 on Vlan10
07:28:31: OSPF: 10.10.10.1 address 10.10.10.2 on Vlan10 is dead, state DOWN
07:28:31: %OSPF-5-ADJCHG: Process 1, Nbr 10.10.10.1 on Vlan10 from EXSTART
to DOWN, Neighb or Down: Too many DBD retransmitions
07:28:31: OSPF: Neighbor change Event on interface Vlan10
07:28:36: OSPF: Rcv DBD from 10.10.10.1 on Vlan10 seq 0x2D3 opt 0x42 flag
0x7 len 32 mtu
1500 state DOWN
07:28:36: OSPF: Nbr state is less than INIT

I tried running other routing protocol between the switch and the router, it
worked fine. Can some body please tell me what's the problem with ospf?

Thanks,
SH



This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:59 GMT-3