DLSW direct over FR

From: Shawn Yang (syang@bitfone.com)
Date: Fri Aug 15 2003 - 16:36:06 GMT-3

• Next message: benmekki kamal: "Re: bgp synchronization problem"
• Previous message: Joerg Kohlenz: "NAT per MPLS VRF"
• Next in thread: asadovnikov: "RE: DLSW direct over FR"
• Maybe reply: asadovnikov: "RE: DLSW direct over FR"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi there,

Here are couple of questions on DLSW direct encapsulation over Frame Relay.

1: The dlsw local-peer statement.
    The local-peer specificies this router's IP addr. But FR direct has no
IP
    involved, so why use IP addr?

2: This statement also takes a different format than TCP encap.

     For TCP: dlsw local-peer peer-id 10.2.23.1
     For FR direct: dlsw local-peer 10.2.23.1

     Notice the keyword "peer-id" is gone.

3: Do we need "passthru" in "remote-peer" statement?
     The Cisco CD shows yes. Some other sources shows no.

 dlsw remote-peer 0 frame-relay interface serial 0 30 "passthru"

http://127.0.0.1:8080/cc/td/doc/product/software/ios122/122cgcr/fibm_c/bcfpa
rt2/bcfdlsw.htm#11895

Shawn

• Next message: benmekki kamal: "Re: bgp synchronization problem"
• Previous message: Joerg Kohlenz: "NAT per MPLS VRF"
• Next in thread: asadovnikov: "RE: DLSW direct over FR"
• Maybe reply: asadovnikov: "RE: DLSW direct over FR"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:59 GMT-3