From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Tue Jul 29 2003 - 15:52:02 GMT-3
Of course, if you are talking about a 5513.
George,
Could you clarify what type of 5500 you are talking about?
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA
NNCDS, NNCSS, CNE, MCSE
http://www.cconlinelabs.com/
Your #1 choice for online cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Peter
Sent: Tuesday, July 29, 2003 11:43 AM
To: ccielab@groupstudy.com
Subject: Re: Atm setup on a 5500
The bottom 5 slots are basically an LS1010 if you install an ASP (ATM Switch
Processor) in slot 13. After that in slots 9 through 12 you can install
carrier modules into which you can plug in PAMs, like 4-port OC3.
_____________________________
Peter
#7247 (R&S, Security, C&S)
CyscoExpert Corp.
4433 W. Touhy Ave. Suite 410
Lincolnwood, IL 60712
Phone (847) 674-3392
Toll Free (866) CyscoXP (297-2697)
Fax (847) 674-2625
----- Original Message -----
From: "George Gittins" <g.gittins@edinburg.esc1.net>
To: <ccielab@groupstudy.com>
Sent: Tuesday, July 29, 2003 1:39 PM
Subject: Atm setup on a 5500
> on a 5500 series switch i would like to simulate atm for the ccie lab,
> what kind of modules will go in this switch to simulate atm?
> what type of modules will work?
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:57 GMT-3