From: MADMAN (dave@interprise.com)
Date: Tue Jul 29 2003 - 16:02:12 GMT-3
Yes but you would be better off getting ahold of an LS1010, price
wise, I would guess.
Dave
Peter wrote:
> The bottom 5 slots are basically an LS1010 if you install an ASP (ATM Switch
> Processor) in slot 13. After that in slots 9 through 12 you can install
> carrier modules into which you can plug in PAMs, like 4-port OC3.
>
> _____________________________
> Peter
> #7247 (R&S, Security, C&S)
> CyscoExpert Corp.
> 4433 W. Touhy Ave. Suite 410
> Lincolnwood, IL 60712
> Phone (847) 674-3392
> Toll Free (866) CyscoXP (297-2697)
> Fax (847) 674-2625
>
>
> ----- Original Message -----
> From: "George Gittins" <g.gittins@edinburg.esc1.net>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, July 29, 2003 1:39 PM
> Subject: Atm setup on a 5500
>
>
>
>>on a 5500 series switch i would like to simulate atm for the ccie lab,
>>what kind of modules will go in this switch to simulate atm?
>>what type of modules will work?
>>
>>
>>_______________________________________________________________________
>>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:57 GMT-3