From: wing_lam@jossynergy.com
Date: Tue Jul 29 2003 - 11:08:15 GMT-3
Hi group,
I have the following scenario, both end are ethernet with bridge-group 9
configured:
R6--------------------R8
172.16.1.6 172.16.1.8
I config R8 Dlsw with the following:
dlsw local-peer peer-id 172.16.1.8
dlsw remote-peer 0 tcp 172.16.1.6 cost 5
dlsw bridge-group 9
The peer can establish successfully, but no matter how I change the cost,
"show dlsw cap" still shows a 3.
R8#sh dlsw cap
DLSw: Capabilities for peer 172.16.1.6(2065)
.................
peer group number : 0
peer cluster support : no
border peer capable : no
peer cost : 3
biu-segment configured : no
UDP Unicast support : yes
...................
But I can change the cost vlaue show in R8 if I change the local peer in R6
(i.e. dlsw local peer 172.16.1.6 cost 4".
Any hints? am I wrong in concept of dlsw cost in remote peer statement?
Thx,
BBD (Big Black Dog)
DISCLAIMER:- This email is confidential and intended only for the use of
the individual or entity named above and may contain information that is
privileged. If you are not the intended recipient, you are notified that
any dissemination, distribution or copying of this email is strictly
prohibited. If you have received this email in error, please notify us
immediately by return email or telephone and destroy the original message.
Thank you.
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:57 GMT-3