From: liqunhui (liqunhui@langchao.com.cn)
Date: Sun Jul 06 2003 - 21:14:51 GMT-3
distance and offset will filter routes? i think they only effect route's metric
thanks
liqunhui
LangChao Cheeloosoft
ShanDa Road 224,JiNan
ShanDong province
Tel:(86531)8932888 ext.8697
Mail:liqunhui@langchao.com.cn
----- Original Message -----
From: <James.Jackson@broadwing.com>
To: <pita40@hotmail.com>; <ccielab@groupstudy.com>
Sent: Sunday, July 06, 2003 4:42 AM
Subject: RE: Permit odd route without using distribute-list
> How about this...
>
> Under routing process of r2:
> distance 255 <IP of R1> 0.0.0.0 1
> access-list 1 permit 208.10.0.0 0.0.254.255
>
> Are you running RIP ? You could also try an offset-list...
>
> HTH
> James
>
>
> -----Original Message-----
> From: pita40 [mailto:pita40@hotmail.com]
> Sent: Saturday, July 05, 2003 3:06 PM
> To: ccielab@groupstudy.com
> Subject: Permit odd route without using distribute-list
>
>
> Diagram
> r1--------- r2-------------r3
>
> Permit odd route from r1 without using distribute-list. You must do this
> config on r2. THe secondary int is here to satisfy other requirement.
>
>
> r2
>
> interface Ethernet0
> ip address 192.168.80.33 255.255.255.224 secondary
> ip address 192.168.80.8 255.255.255.0
> ip access-group 1 in
> no ip split-horizon
>
> access-list 1 deny 208.10.0.0 0.0.254.255
> access-list 1 permit any
>
> If I use distribute-list it works but when I try to use the above config it
> permits all routes from r1.
> What I mine doing wrong
>
>
> Peter
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> +++The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, retransmission, dissemination or other use of, or
> taking of any action in reliance upon, this information by persons or
> entities other than the intended recipient is prohibited. If you received
> this in error, please contact the sender and destroy any copies of this
> document.+++
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:26 GMT-3