From: James.Jackson@broadwing.com
Date: Sun Jul 06 2003 - 21:42:35 GMT-3
Forcing distance to 255 or hopcount to 16 (RIP) will prevent specified
routes from being installed in RT (and as such advertised to other routers
in the case of DV protocols).
James
-----Original Message-----
From: liqunhui [mailto:liqunhui@langchao.com.cn]
Sent: Sunday, July 06, 2003 7:15 PM
To: Jackson, James (DS Engineering); pita40@hotmail.com;
ccielab@groupstudy.com
Subject: Re: Permit odd route without using distribute-list
distance and offset will filter routes? i think they only effect route's
metric
thanks
liqunhui
LangChao Cheeloosoft
ShanDa Road 224,JiNan
ShanDong province
Tel:(86531)8932888 ext.8697
Mail:liqunhui@langchao.com.cn
----- Original Message -----
From: <James.Jackson@broadwing.com>
To: <pita40@hotmail.com>; <ccielab@groupstudy.com>
Sent: Sunday, July 06, 2003 4:42 AM
Subject: RE: Permit odd route without using distribute-list
> How about this...
>
> Under routing process of r2:
> distance 255 <IP of R1> 0.0.0.0 1
> access-list 1 permit 208.10.0.0 0.0.254.255
>
> Are you running RIP ? You could also try an offset-list...
>
> HTH
> James
>
>
> -----Original Message-----
> From: pita40 [mailto:pita40@hotmail.com]
> Sent: Saturday, July 05, 2003 3:06 PM
> To: ccielab@groupstudy.com
> Subject: Permit odd route without using distribute-list
>
>
> Diagram
> r1--------- r2-------------r3
>
> Permit odd route from r1 without using distribute-list. You must do this
> config on r2. THe secondary int is here to satisfy other requirement.
>
>
> r2
>
> interface Ethernet0
> ip address 192.168.80.33 255.255.255.224 secondary
> ip address 192.168.80.8 255.255.255.0
> ip access-group 1 in
> no ip split-horizon
>
> access-list 1 deny 208.10.0.0 0.0.254.255
> access-list 1 permit any
>
> If I use distribute-list it works but when I try to use the above config
it
> permits all routes from r1.
> What I mine doing wrong
>
>
> Peter
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> +++The information transmitted is intended only for the person or entity
to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, retransmission, dissemination or other use of, or
> taking of any action in reliance upon, this information by persons or
> entities other than the intended recipient is prohibited. If you
received
> this in error, please contact the sender and destroy any copies of this
> document.+++
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
+++The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and destroy any copies of this
document.+++
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:26 GMT-3